fbpx
Loading…

How To Repair Samsung Z Flip 3 Screen Replacement

Samsung Z Flip 3 Screen Replacement

Samsung Z Flip Screen Replacement Guide

“The Samsung Z Flip 3 Screen Replacement is brilliant, but the LCD and display can easily break if you aren’t careful…”

How To Repair Samsung Z Flip 3 Screen Replacement Guide?

The Samsung Z Flip 3 is a unique foldable smartphone that comes with a flexible screen. However, accidents can happen, and you may end up with a broken or cracked screen. Fortunately, the process of replacing the screen on the Samsung Z Flip 3 can be found below as well as mail in service options for those who do not have the necessary tools.

Step 1: Gather the necessary tools and parts

Gather the necessary tools and parts

To replace the screen on your Samsung Z Flip 3, you will need the following

  • AOD Mini Samsung Screen Removal Tool (or a heat mat with suction cup)
  • Small phillips screwdriver
  • Spudger(s)
  • Tweezer(s)
  • Samsung Z Flip 3 Screen Replacement
  • (recommended, but optional) Water Resistant Seal

Step 2: Power off your phone and remove the SIM card tray

Before you start the repair process, turn off your phone and remove the SIM card tray from the side of your device.

Step 3: Use a heat tool to remove the two pieces of back glass.

heat tool

Using the Samsung Automatic Opening Device (AOD), heat the back of your phone at approximately 60C / 70C  minutes to soften the adhesive that holds the back cover in place.

Step 4: Use a plastic spudger to remove the back cover

disconnecting ribbon cable on Z Flip 3 Display Repair

Once the adhesive has softened, use a plastic spudger to gently pry the back cover away from your device. Be careful not to damage any of the components inside your phone, including the flex cable connecting to the top back glass LCD.

Step 5: Remove the screws that secure the bracket cover over the battery and 4 other flex cables.and disconnect the battery cable

Samsung Z Flip 3 Removing Back Glass LCD

Use a small Phillips screwdriver to remove the screws that secure the cover plate that is over the battery flex cable to your device. Then, disconnect the battery cable from the motherboard using a ESD safe spudger. Then disconnect the 4 other flex cables that are connected to the main motherboard.

Step 6: Remove the screws that secure the black plastic cowling and set the cowling to the side.

Step 7: Remove the motherboard of the Samsung Z Flip 3

Carefully use a spudger to gently pry out the motherboard from the housing of the Samsung device. Set the board somewhere safe.

 disconnect the screen cable from the motherboard.

Step 8: Remove the 5g Antenna and flex cable.

Samsung Z Flip 3 5G Antenna Removal

NOTE: Certain models may not have this antenna

Unscrew the 2 phillips screws remove the 2 screws securing the antenna into the frame of the device. Using a heat gun or mat heat up the area to soften the adhesive then use a set of tweezers to remove the 5g antenna.

Step 9: Remove the wireless charging pad, flex cable, and charging port plastic cowling.

Samsung Z Flip 3 Wireless Charging Pad Removal During LCD Repair

Moving to the bottom section of the Z flip 3, remove the 2 screws covering the wireless charging plate and then remove the 5 screws securing the black plastic cowling above the charging port. Uses a spudger to pry out the cowling, then disconnect the wireless charging pad and gently lift away from the device to remove it entirely.

Step 10: Remove the charging port board

Samsung Z Flip 3 Screen Replacement Charging Port Guide

WARNING: There is a flex cable connected to the bottom of the charging port board that must also be disconnected.

Disconnect the two flex cables connected to the charging port board. Unscrew the one phillips screw that is securing the charging port board to the phone. Then gently lift the charging port board up. You may need to use a heat mat or heat gun to loosen the adhesive holding down the charging port.

Carefully install the replacement screen into your device, making sure that it is properly aligned.

Step 11: Remove the vibrator motor

Samsung Z Flip Vibrator Motor

Using some heat and a pair of tweezers, pry up the vibrator motor.

Step 12: Replace the vibrator motor and charging I/O board.

Samsung Z Flip Genuine Screen Replacement New Battery Replacement

NOTE: In this repair guide our XiRepair service technician is using a genuine Samsung screen replacement which includes an OEM battery replacement, if you purchase an aftermarket or used version of the screen it may not come with a new battery.

You will need to connect the flex on the rear of the charging I/O board before you install into the frame of your new Samsung Z Flip 3 screen replacement. Resecure the screw holding down the charging port board, then reattach the other two flex cables that connect to this board.

Step 13: Replace the wireless charging pad and charging port cowling.

Samsung Z Flip 3 Wirless Charging Pad Putting it back in

Gently secure the cowling and pad back into place using the appropriate phillips screws for the Samsung Z Flip 3 display.

Step 14: Remove the black sticker cover

Z Flip 3 How To Repair cracked or damaged screen

NOTE: If you are using a NEW screen or a genuine Samsung service pack there will be a black sticker that covers the front camera slot. This is to protect the glass from smudges and damages during the repair process.

Remove the black sticker adhesive and reinstall the motherboard into the device.

Step 15: Replace the motherboard

Gently insert the logic board. Ensure that all five flex cables are above the motherboard. Sometimes they can get lodged underneath.

WARNING: Be careful mishandling or dropping the motherboard could cause damage, including possible scratching or damaging the cameras.

Step 16: Replace black plastic cowling

Samsung Z Flip 3 OEM Genuine Screen

Step 17: Replace the 5 screws holding down the black plastic cowling.

Replacing Screw on Samsung Z Flip 3 Cell Phone

Step 18: If your Samsung Z Flip is a 5G model and has the 5G antenna. Replace the 5G Antenna

Samsung Z Flip 3 5G Antenna

Step 19: Re Secure the plates and 3 screws holding down the 5G Antenna and plate covering the 5 flex cables on the motherboard.

Samsung Z Flip 3 Screen Replacement Plate Covers

Step 20: Replace the (optional) water resistant seal and the top back glass.

NOTE: This step can only be completed if an appropriate water resistant seal has been purchased for your device.

Replacing Samsung Z Flip 3 Water Resitant Seal

NOTE: Make sure to remove the original and any remaining pieces of the water resistant seal. This seal is a strong adhesive that adheres the screen to the frame of the phone.

Ensuring water resistant seal sits properly on Samsung Smart Phone
Replacing the bottom back glass on Samsung Z Flip 3

Step 21: Replace the back glass

Remove the old water resistant seal adhesive
Replacing top glass water resistant seal on flip smart phone
Samsung Z Flip Back Glass LCD

Once the water resistant seal has been removed and replaced with a new one, connect the rear glass LCD flex to the motherboard and gently press down on the screen to ensure that the device’s back glass is strongly adhered to the back of the smart phone.

Closing the Samsung Z Flip 3 Screen Replacement with Genuine OEM part

Step 22: Test the device.

It’s important to test all the functionality of the device such as:

  • Test phone call
  • Front and back rear camera tests
  • Vibrator motor test
  • Charging port test
  • Face ID / Biometrics
  • Internet connectivity / wifi
  • Bluetooth
  • Other important features and functions

In conclusion, repairing the screen on your Samsung Z Flip 3 is not a difficult task if you have the right tools, replacement parts and knowledge. However, if you are not confident in your ability to repair your device, it is best to seek a Samsung cell phone repair service provider, like our company XiRepair.

XiRepair has repaired over 25,000 smartphones, computers, and other electronic devices since 2014. XiRepair is a certified Samsung cell phone repair service provider which allows our team to purchase genuine OEM parts and tools directly from Samsung.

Can you use the Samsung Z Flip 3 with a bad LCD / Display / Screen?

Yes unless the device’s digitizer is damaged too or the LCD’s is so damaged that the screen will not display. Both of these issues can be fixed with a screen replacement service.

While technically you may be able to use the Samsung Z Flip 3 with a bad LCD or display, it is not recommended. The display is a critical component of the phone, and a damaged screen can affect the phone’s functionality and usability.

If the screen is cracked or shattered, it may be difficult to see or interact with the phone’s content. The touch functionality may also be impaired, making it difficult to navigate the device. Additionally, a damaged screen can also lead to further damage to the internal components of the phone.

If you have a bad LCD or display on your Samsung Z Flip 3, it is recommended to get it repaired or replaced as soon as possible to ensure optimal performance and prevent further damage.

What causes the Samsung Z Flip 3 Screen / LCD / Digitizer to break?

There are several factors that can cause the Samsung Z Flip 3 screen, LCD, or digitizer to break. Some common causes include:

  1. Drops or impacts: One of the most common causes of a broken screen on any phone is dropping it or subjecting it to impact. Even a small drop can cause cracks or damage to the screen or LCD.
  2. Pressure or bending: The Samsung Z Flip 3 has a foldable screen, which can be more vulnerable to damage from pressure or bending. Putting pressure on the screen or folding it the wrong way can cause damage to the screen or digitizer.
  3. Water damage: While the Samsung Z Flip 3 is water-resistant, it is not completely waterproof. If the phone is exposed to water or other liquids, it can cause damage to the screen or other components.
  4. Manufacturing defects: In rare cases, a manufacturing defect can cause the screen or LCD to fail prematurely.
  5. Normal wear and tear: Over time, the screen and LCD on any phone can degrade and become less responsive. This can be exacerbated by exposure to heat, cold, or other environmental factors.

It is important to take care of your Samsung Z Flip 3 and handle it with care to avoid damaging the screen or other components. Using a protective case and screen protector can also help prevent damage from drops or impacts.

Can you fix the Samsung Z Flip 3 yourself?

Yes if you have the correct tools, equipment and access to the necessary parts. Unlike other Samsung Galaxy models, the Z Flip 3 series requires a specialized heating solution with a specific type of suction cup to safely remove the back glass without cracking or damaging the device further. If you don’t have experience with cell phone repair, then we wouldn’t advise you to attempt this repair on your own, if you are confident though go for it!

Is it worth fixing the Samsung Z Flip 3 with a broken or damaged screen / display?

Yes! The Samsung Z Flip 3 would cost over $1,100 for a replacement device when you factor in the new device, taxes and activation fees. The repair will be well less than ⅓ the cost of replacing the device! To find out how much XiRepair charges to fix the Samsung Z Flip 3 click below.

Is it worth fixing samsung z flip 3

Who has the best cracked glass Samsung Flip 3 Screen Replacement service?

XiRepair offers same day certified Samsung cell phone repair services offering genuine OEM parts directly from Samsung as seen in our Samsung Z Flip 3 repair guide above.

At XiRepair we are one of the largest walk-in and mail-in service providers of Samsung smart phone repairs. Our certified technicians receive numerous Samsung smart devices to repair every single day! Our main service center is located in Montgomery, Alabama and is open to walk-ins and accepts mail-in repairs from all across the country. 

If you are looking to get your Samsung Z Flip 3 repaired without the risk of damaging it, click “GET A FREE QUOTE” below to see how much we currently charge for your repair. 

How much do we charge?

We offer a fast quoting system that will give you a free quote for your device based on the problem you are encountering. Click Get a FREE Quote below to learn the cost of your repair.

free 4 Free Diagnostics
warranty 2 1 Year Warranty
oem 3 OEM Quality Parts