Below is a simple breakdown of the repair process;
1.Testing for the problem
The professional team will test the port to ensure it really is malfunctioning. There are instances where it’s a case of a broken cable, and the port doesn’t need any fixing. In such a case, the cable is replaced, and once everything checks out, you’re good to go.
2.Opening the console
The above-mentioned scenario isn’t all that common. Mostly, you’ll turn to professionals when you’ve run out of other solutions. So, after the port is identified as damaged, the next step is opening the PlayStation in order to remove the damaged port.
You might notice a few stickers being peeled off while the console is being opened. This is because some of the screws on your PS4 are hidden behind the stickers. Next, the repair service personnel will lift the plastic cover and remove the power supply unit (PSU) and hard drive.
3.Removing the motherboard
A PlayStation console is intricately bound together, and taking it apart to this point requires expertise. At this point, the motherboard is removed to make accessing the HDMI port easier. It’s important to note where you keep all the screws. You can take pictures of the device along the way to help you when you are putting it back together.
4.Desoldering the damaged HDMI port
After all this work, the repair personnel can finally access the damaged port. Even when it is loose, the port could still be tightly attached to the control panel. As a result, the repair team will carefully detach the port by using a desoldering pump.
Moreover, at this stage, the repair service can clean the console if it’s too dirty or dusty. They can either use a blower or rubbing alcohol. This cleanup is essential and will help your PlayStation work at optimum capacity for longer.
5. Replacing and soldering the new HDMI port
Once you’ve safely removed the broken port, you can fix a new one by inserting it into the dedicated slots running through the board. Now, towards the final part, you’ll have to carefully solder the small pins and ensure each one is attached correctly.
Once you’ve safely removed the broken port, you can fix a new one by inserting it into the dedicated slots running through the board. Now, towards the final part, you’ll have to carefully solder the small pins and ensure each one is attached correctly.
Clearly, it is possible to fix a damaged PS4 HDMI port. Using the steps outlined above, you can
systematically open the console, replace the damaged HDMI port, and put the device back together.
However, you may have noticed you need some expertise to pull off this process. If you are unsure of what to do, the best choice is to take the PlayStation to someone who knows what to do.